PRODUCT



VD-ACTO(MagicTrunk)

>

▶ ACTO-I
BlackBox

>

▶ VD-9600WHG/B

>

▶ VD-9500H

>

▶ VD-1600HD

>

▶ VD-9000FHD

>

▶ VD-8000HDS

>

▶ VD-7000W

>

▶ VD-5000W

>

▶ VD-3000

>

▶ VD-1500MG/MB

>

▶ VD-1500G/B

VD-1500G/B

VD-1500G/B
Startup
  • Turn off the engine and remove the key from ignition.
  • Check whether the SD card is inserted to the unit.
  • Turn on the engine
  • When the engine is turned on, the system starts with the program installed in the SD card and voice notification will be announced.
  • Then the REC and GPS lamps will turn on.
  • The REC lamp will turn blue while blinking.
  • The GPS lamp will turn red if no signal and blue if receiving signal.
  • The GPS connection may take a couple of seconds to several minutes, depending on where the vehicle is.

Normal Recording and Event Recording
  • While the power is on, the normal recording is on as well. The REC lamp will be blinking blue.
  • In normal recording mode, recordings are 1 minute in duration and are stored in NORMAL folder. If the memory is full while in normal or event recording mode, the program will erase starting from the oldest recorded data then record a new file. The management is based on First-In First-Out (FIFO)
  • In the case of an impact, the sensors will trigger the event mode. Users are notified by an alarm. The REC lamp will be red and the recorded data will be saved in the (EVENT) folder.
  • When an impact is registered, the program records 10 seconds prior to the impact and 15~60 seconds after the impact (adjustable in the configuration) as an EVENT file
Manual EVENT Recording
  • When the [SHOT] button is pressed, it works the same as impacted.
  • The [SHOT] button can also be used to record scenes of other accidents or great scenery you may want to save while driving.
Video-Out Display
  • You can connect a display to the system using a V-out port and optional connector cable to watch what the system is currently recording.
Voice Recording
  • When the [SHOT] button is pressed and held for more than 3 seconds, the voice notification will announce that the voice recording will initiate. Do the same to stop voice recording.
  • The initial audio recording setting can be changed in the analysis program.
Automatic Parking Surveillance Mode
  • VisionDrive automatically activates the Parking Mode when registering no movement for more than 10 minutes on condition that “Automatic Parking Mode” in Setting is on.
  • The system will automatically reboot initializing in 320x240 mode which can record 3-minutes long as a NORMAL file thus to save more files in SD card while parking.
  • A voice notification will be announced that the parking mode has been initiated.
  • In parking mode, the system repeats “Parking mode is on” every 2 minutes.
  • 2+ seconds Impacts (i.e. car starts), system will reboot and return to the normal recording configuration with voice notification that the driving mode will start.
  • If “Automatic Parking Mode” is not selected, the system will record files in NORMAL folder.
  • Extensive and continuous use of the vehicle’s power source may exhaust the performance of the product. The company is not liable for the damages from continuous use of the product more than 24 hours. We recommend having the full power off after use of 2~3 days in a row for maintaining the product in good condition.
SD Card Use
  • The Product will only work with the SD card issued by the manufacturer. The SD cards contain programs necessary to operate the product. Also, the provided authentic VisionDrive™ SD card is tested and certified by the manufacturer while other SD cards may not match the performance and specifications.
  • To eject the SD card from the product, the engine has to be turned off and the key should be removed from the ignition. A few seconds after the key has been removed, the product will turn off automatically and the LED lamps will be turned off as well. The built-in back up battery allows the last images to be stored into proper folders before the product is completely turned off. Wait until the LED lamps are turned off, then remove the SD card.
  • When the SD card is removed, it needs to be reinserted before you drive your car again. Without the SD card, the product will not function properly.
  • If a voice notification repeatedly announces to insert a correct SD card, it means the SD card is defected or damaged. Purchase a replacement. SD card, it means the SD card is defected or damaged. Purchase a replacement.
  • Use only SDHC supporting SD card readers to read the SD(HC) card. SD card readers can be purchased at computer accessory stores.
Automatic System Check and Safe Rebooting Function
  • This product is programmed to automatically check and reboot the system if the product is in a non-functional status. By rebooting the system, the product notifies to the user that such action is being taken place.
  • By safeguarding the system in this manner, the stability of the system is reinforced. If the system keeps rebooting repeatedly, the program installed in the SD card may have been damaged or altered.
PC Analysis Program Use
  • PC Analysis Program Use
  • PC Analysis Program Use
    After the SD card is connected to the PC, open up the VDAnalyzer.exe file in the SD.
  • How to play the files
    • To play a certain file, select a file from the list located on the right-hand side and double click on it.
    • The most recent data will be listed on the top.
    • The (EVENT) folder will be the default folder to show up when you first open the program.
    • The (NORMAL) folder will have normal recording files and you may view them by clicking “open” on the analyzer.
    • The names of the files are shown as below : ( Type : N-Normal, E-Event, P-Parking) eg.) yymmdd-hhmmss-type.MP4 101102-101202-N.MP4
  • Auto-play Function
    • After you double-click a file, the following recordings will automatically and continuously play one after another. However, the (EVENT) and (NORMAL) folders are not continuously connected with each other. Each folder has to be opened separately.
  • Positioning on the map
  • Positioning on the map
    • With the GPS data, the map shows the location of the vehicle while playing the recorded data.
    • The Google map is viewable only whilst your PC is connected to the Internet .
  • Smart phone Playback
    • The video files are MP4 format and they can be played on your smart phone.
    • Insert the Micro SD into the slot of your phone and run the media player.
  • Shock Sensor Graph
  • Shock Sensor Graph
    • The graph below shows impacts on the x-y-z axis of the vehicle.
      • X-axis : measures and records impacts from the front and back of the vehicle ( 0G ~ 3G is registered)
      • Y-axis: measures and records impacts from the left and right sides of the vehicle ( 0G ~ 3G is registered)
      • Z-axis: measures and records impacts from the top and lower part of the vehicle ( 0G ~ 3G is registered)
    • The bottom and left displays a progress bar showing the time line of the video.
    • Red line is before impact and blue after impact.
  • PLAY / PAUSE / PREVIOUS FRAME / LATTER FRAME
  • PLAY / PAUSE / PREVIOUS FRAME / LATTER FRAME
    • When the play button is pressed, it will replay the video file listed on the screen. After selecting a file from the list, double click the file from the list to play the file.
    • When you press the pause button, the viewing video will be paused.
    • When the previous frame or the latter frame button is pressed, it will move backward or forward between frames within the file.
  • SPEED METER
  • SPEED METER
    • While the file is being played, the speed meter will show the vehicle’s speed that was collected by the GPS .
  • Configuration
  • The video resolution and quality settings can be modified.
    • The video resolution and quality settings can be modified.
    • If the resolution is high, the file size also becomes larger and will take more memory on the SD card.
    The sensor can be configured. If the number is larger on the sensor, the sensor becomes less sensitive.
    • The sensor can be configured. If the number is larger on the sensor, the sensor becomes less sensitive.
    The voice recording and the impact alert setting can be configured.
    • The voice recording and the impact alert setting can be configured.
    You can type in your car information, which will be shown in the video during playback.
    • You can type in your car information, which will be shown in the video during playback.
    When set to a defined number, the system will alert you to over speeding.
    • When set to a defined number, the system will alert you to over speeding.
    You can select your location and time zone and the GPS will register your local time with your video.
    • You can select your location and time zone and the GPS will register your local time with your video.
    You can select whether you use the Security LED function. If selected in the box, Security LED will work (Blinking while in use).
    • You can select whether you use the Security LED function. If selected in the box, Security LED will work (Blinking while in use).
    • Automatic parking surveillance mode can be selected.
    • If Check DISK function checked, the system will run Disk Checking function every time you boot the system and it will result in longer boot/startup times.
    You can select your local speed type as Km/h or mile/h in the tap.
    • You can select your local speed type as Km/h or mile/h in the tap.
    If you buy the VD-1500B, it has no GPS module to register system time. If you press this button, the VD-1500B system’s time will be initialized and synchronized to your PC’s current time to register your time information onto the recorded video from now on.
    • If you buy the VD-1500B, it has no GPS module to register system time. If you press this button, the VD-1500B system’s time will be initialized and synchronized to your PC’s current time to register your time information onto the recorded video from now on.