Car Black Box Vision Drive VD-3000

Home > Product > VisionDrive_VD3000

While driving do you want to remember an important moment?

While driving do you have the need to record evidence of an accident?

Do you want to instill safe driving habits in your precious family members? Do you want to remember beautiful scenery while driving?

The VisionDrive auto blackbox can store past driving events in high quality video and store various on the spot sensor analysis data. In the case of reckless Acceleration / Braking / Turns, the VisionDrive sensor will warn the driver and lead to safer driving patterns resulting in accident avoidance.

Features

Spec.

Install

Usage

Caution

Installation Precautions

Check the cautions as follows before installation for safe installation and use.

Install the product in a bright and safe area.
Installation should be started after the car engine fully stops and car keys are ejected.
The power cable of the Vision Drive should be connected at the end of installation.
The product's power shall be connected only to the cigar jack whose power ranges from DC12V ~ DC 24V. The user shall consult or refer to the service center in case that cable covering needs to be uncovered and connected to the car.

Installation sequence following parts

Check the cautions as follows before installation for safe installation and use.

Bracket and Vision Drive connection
Memory: Insert an SD memory card in Vision Drive
Vision Drive: Remove the double stick tape of the bracket and attach the bracket to the front window
Cable: Connect the cables to the Vision Drive and arrange the cables
Power: Connect the cable between cigar jack and the product
Camera: Adjust the Vision Drive's camera angle
Test: Test buttons (View/Shot/Play)
Operation: car operation and system operation

Installation procedure

Zoom

Fix the bracket to the Vision Drive groove and push it left to fix (push the Vision Drive left to detach the Vision Drive only)

Zoom

Insert an SD memory card as shown in the left photo after the connection of the Vision Drive to the bracket. (To eject the SD memory card from the Vision Drive, the SD memory card can be automatically ejected if the SD memory card is pressed in / during power-off status of the car. Note that the product can be damaged if the SD memory card is ejected with the force of tweezers or finger nails)

Zoom

- Clean the impurities on the window to attach the Vision Drive after selection of the suitable place (The center of the car is recommended to attach the Vision Drive and enough space on both sides is recommendable to prepare detachment of the Vision Drive)
- For the first installation, the tape shall be partially stripped and temporarily attached to the car window because the adhesion of the bracket tape is very strong. (The Vision Drive shall be fully fixed after checking the correct position through the LCD screen while on.)

Zoom

- Power cable shall be connected to the Vision Drive and the user arranges the cables by using cable holders as shown in the photo.
- Insert the power jack of the product in the car cigar jack.

Zoom

The Vision Drive boots up if the car key is turned to ACC Power, voice guidance starts through the speaker and LCD screen shall be activated. (Do not power off before voice guidance and LCD screen are fully deactivated in case of the first operation after power cable connection. Power-off during operation time can cause errors to the product)

Zoom

- Adjust the shot angle by moving the camera up and down. (Vision Drive's LCD lights can be on for several minutes in case of power-on for safe driving. If the user needs longer checking time for LCD, turn on the LCD by pressing the VIEW button of the Vision Drive. The user shall return it to recording status by pressing the VIEW button after the checking activity finishes.)
- The radio antenna should be placed a distance from the GPS module or optional external GPS module can be used because the GPS sensor's reception ratio can be affected by the antenna position or metallic coating on the window in case of in glass types of radio antenna, usually imported cars.
- Note that video recording can be disturbed by reflective and bright materials on the dashboard which can be reflected on the window.
- When LCD is off and REC LED is on, an ordinary recording status starts.
- GPS LED is on when a normal signal is being received, it turns blue. (Operation times of GPS reception are adjustable due to car's location)

Zoom

Use the included wire holders to organize the cables.

Set the Vision Drive Camera to face the front direction of the car.

Camera turns up and down to 60 degrees from the top position. The camera is set tightly to prevent loosening from vibration of the car. Please secure that you put enough power to move the camera angle for adjustment.

You can get the best picture when you set the angle of the camera to have your car hood (bonnet) part upto 1/3 from the bottom of your PC screen or LCD as shown above.