PRODUCT


VD-ACTO(MagicTrunk)

>

▶ ACTO-I
BlackBox

>

▶ VD-9600WHG/B

>

▶ VD-9500H

>

▶ VD-1600HD

>

▶ VD-9000FHD

>

▶ VD-8000HDS

>

▶ VD-7000W

>

▶ VD-5000W

>

▶ VD-3000

>

▶ VD-1500MG/MB

>

▶ VD-1500G/B

VD-3000

Home > Product > VisionDrive_VD3000

VD-3000
VD-3000

While driving do you want to remember an important moment?

While driving do you have the need to record evidence of an accident?

Do you want to instill safe driving habits in your precious family members? Do you want to remember beautiful scenery while driving?


The VisionDrive auto blackbox can store past driving events in high quality video and store various on the spot sensor analysis data. In the case of reckless Acceleration / Braking / Turns, the VisionDrive sensor will warn the driver and lead to safer driving patterns resulting in accident avoidance.

Features

Spec.

Install

Usage

Caution
Startup
  • Check if the car engine is turned off and keys are removed.
  • Check if an SD memory card is inserted in the Vision Drive.
  • Start up the car
  • Normal recording starts when LCD is on, voice guidance is released and record preview is temporarily shown through the LCD screen after startup. (REC Lamp on)
  • GPS lamp-on can take from several seconds to minutes depending on the reception location.
Features and operation
  • Vision Drive records for safety reasons when voice guidance is being given or the LCD screen is on (START/VIEW/PLAY).
  • The stored event files (Impact/Shot) are played if the PLAY button is pressed. To see another (previous) impact file stored, press VIEW button while playing an impact file. (The audio play only works in the VD Analyzer software on your PC in the case that audio record is set to ON.)
  • LED and Audio of this product indicate the following details.
    • LED and Audio of this product indicate the following details.
Video recording
  • VisionDrive records video continuously after normal startup. Ordinary recorded files are stored as "normal" files, saving the recent 5 minutes.
  • In case that a certain level of impact is given to the car while driving or stopping the impact sensor is triggered and video files are stored as "Impact" files for over 25 seconds (10 seconds before the impact, 15-60 seconds after the impact) to EVENT folder.
  • The files are stored as "Impact" files if the user presses the "SHOT" button of the Vision Drive even if there is no impact given to the car of if the impact is slight or there is no impact.
  • In the case additional EVENT files are triggered and stored by impacts, the file will be saved in a series in the according folder and the recording time will be extended.
How to eject memory card
  • Eject the SD memory card by following the steps after powering off Vision Drive.
    1. Car keys should be removed from the car after the car engine stops.
    2. When the car engine stops the Vision Drive will power off after a few seconds and the LED will shut off. (Vision Drive will completely shut off after the final video scenes are safely stored for an additional several seconds using the high capacity backup battery)
    3. Eject the SD memory card by clicking it in.
  • The ejected memory card used for video playback on the PC should be inserted back in the Vision Drive the next time it is used. Video record is not possible without a SD memory card.
Error message guidance
  • Insert the SD card, when the voice of "Insert SD card" is announced in the case no SD card is inserted or defected.
  • Purchase and use a new card in case that the same voice guidance repeats although an SD card has been already inserted because it is regarded that the SD card has defects.
  • Consult us or the warranty service center if there is a system error (e.g. no booting) excluding SD card errors.
PC analysis program preparation
  • Execute "VDAnalyer.exe" program equipped in the SD card after the SD memory card is connected to PC.
  • An optional SD card reader (USB adaptor, SDHC compatible) shall be necessary in case there is no slot for SD cards (SD or SDHC) or PC does not support SD cards. (Additional cost)
    • PC analysis program preparation
VD Analyzer Program usage
  • Startup: The following screen is shown if VDAnalyer.exe in the SD card is executed after a SD memory card is connected to a PC. A correct password needs to be entered. (The default password is "12345678" new password selection will be prompted at the configuration page).
    VD Analyzer Program usage
  • File reading: Stored folders (Normal/Event) in the SD card are displayed if (OPEN) icon is clicked. If one of folders is chosen, a video file list appears on the top right corner. File names are displayed based on the time when videos were stored. ( e.g. 20090213-130534-1.vd : Feb 13th, 2009. 13:05 hour 34 seconds, -1 means normal / -2 means impact )
  • A file name is displayed as NoGPS-XXXXXX-X if there is no date or time data because of bad GPS reception.
  • File selection: If a desired file on the list is clicked, the screen shot shall be shown in the center of window. (Preview feature)
    • VD Analyzer Program usage
  • Video check: The date is displayed on the left bottom corner, the time is displayed on the right bottom and the speed is displayed at the bottom center. (The speed can not be displayed in case of bad GPS data. Reset of date and time can take several minutes if GPS data was not updated for a long term of underground parking. e.g. 1 week.
  • PLAY: A video plays forward if icon is pressed.
  • Note : Audio of a sound recorded file can only be played in basic play speed mode.
  • Frame PLAY: if "frame PLAY" icon is clicked during operation or preview status, a frame based shot of the file will be shown. This is useful for detailed shot analysis.
  • Progress bar: a blue range of the progress bar means a recorded video before the event and a red range means the one after the event. Easy search is supported by moving the progress bar left and right by clicking a switch icon on the progress bar with the mouse.
  • Map Linked: A map to display the driven position is shown on the right bottom corner in case that PC is connected to the Internet. (A map can not be shown if GPS data reception was not good at the accident scene even if the PC is connected to Internet)
  • Screen size edit: Full screen size of display for 1280 * 960 videos is supported if "full screen" icon on the right bottom corner of the program is clicked. The original size is restored if an additional double click is executed or "original size" icon is clicked.
  • Impact graph analysis: a graph on the right bottom corner displays the impact information of front and back/left and right/top and bottom at the moment of event record
    • Impact intensity of front and back, the driver centered: x axe (0.000G~+-3.000G)
    • Impact intensity of left and right, the driver centered: x axe (0.000G~+-3.000G)
    • Impact intensity of top and bottom, the driver centered: x axe (0.000G~+-3.000G)
  • AVI convert : A folder location to store the file is prompted if icon is clicked during preview/pause status of a certain video file in the list. "xxxx.avi" file is created as the same name displaying a message of "AVI file recording" when the folder location is confirmed and the "Play" button is pressed.
  • Program information : Program information such as program version of analyzer is shown if information icon is clicked.
  • Configuration : configuration such as password can be set if configuration icon is clicked.
  • User configuration : The user can edit the system configuration values to their preference.
    1. Set recording quality : Recording video (640 * 480 is the default record resolution after shipment, the file size should be higher if better recording quality is desired)
      Set recording quality : Recording video (640 * 480 is the default record resolution after shipment, the file size should be higher if better recording quality is desired)
    2. Set the impact detection sensor. : A default value is set after shipment and moderate values can be set considering the car type and pavement status. The sensor can not detect an event if the sensitivity value is set too high, it will not sense slight impacts. On the contrary, the sensor can detect too many events if the sensitivity value is set too low, becoming very sensitive to impacts.
    3. Set the time length stored after impact.
    4. Set the size of event files (and thus the size of normal file's) partition to be stored.
    5. Set to use audio recording or not. (the default value is off)
    6. Set the volume of the alert tone.
    7. Set the time zone and Daylight Saving Time of the user.
    8. Set the vehicle and speed type of the vehicle.
    9. Set the password. Repeated input for verification is required (6~8 of numbers and alphabet, non case-sensitive)
    • VD Analyzer - Setting