Warranty service and responsibility scope

We shall not be responsible for the damages caused by errors or data loss of this product, plus the damages while this product is being operated by a user. VD-3000 is designed to record, store, play and analyze the videos incurred by impacts and car accidents. Videos can be also recorded even at user's discretion. However, it is not assured to record all videos in a specific environment or operation situation. Furthermore, under circumstances that the impact on a car is weak or a slight accident happens, the vibration sensor can not detect the impact, which can induce that the equipment is unable to automatically start recording to the event folder. In this situation, the urgent save button (SHOT) on the Vision Drive should be pressed to start recording a video to the [Event] folder all other files will be saved in the [Normal] folder.

Caution to use.

• SD cards of this product shall be used solely for Vision Drive. In case of loss and damage of the SD cards, the user shall consult the purchased shop or retailer.
• If videos are recorded with inferior and defective SD cards or other brand's SD cards, the quality of videos can be damaged or the videos can not be recorded or played.
• Do not disassemble or remodel this product. It can cause an electric shock. Warranty service shall not be provided if responsibility for the accident is agreed to return to the user because of wrong operation. Consult the purchased shop and retailers for the cases that product maintenance and repairs are necessary.
• Do not use other power adapters except the appropriate one for the specifications. It can cause defects and fire.
• Under the circumstances that the user selects other types of cables except the enclosed one or the cables are connected to other power supply, defects or fire can easily be provoked. Note that wiring should be carefully implemented not to damage the current cables.
• The power cable shall be unplugged under the circumstances that this product is connected to an ordinary auto power supply or used for a car that has several cigar jacks as an ordinary power supply. If an improper power supply is used there can be electrical discharge.
• This product shall be installed strictly inside a car following the informed procedure during installation. Impurities on the car windshield can weaken the adhesive strength and can damage the product if the product drops because of weak adhesion.
• This product is not water-proof. Be careful to avoid liquids or impurities entering the product.
• In case of cleaning the interior side of a car, do not use chemicals or detergents. These can cause quality deterioration or errors to the vision drive.
• In case that there are impurities at the surface of a car window or at the surface of this product camera, a distorted image can be obtained because of diffused reflection and abnormal refraction. Windows and camera lens where camera is placed should be always maintained to be clean.
• Be careful to prevent images of this product from being blurry or recorded images from being distorted because of excessive window tinting on the windshield.
• Note that because this product uses a camera, recording can be distorted under the condition that brightness suddenly changes e.g. passing through a tunnel or reverse light is too strong during the day or there is no light at night.
• In case there is not enough lighting better images can be recorded if the user turns on the lamps in the car.
• Note that data can not be stored in this product in case of accidents that the acceleration impact is under a certain level. Manual recording to the [Event] folder can be done by pressing the SHOT button in this case.
• Image data can be damaged if the user ejects the SD card in ON status of main power. Eject the SD card after the main power is completely off.
• If you operate the product while driving, then it is risky, it can cause a car accident. Therefore, the user should manipulate the product after fully stopping the car to a safe area.
• Dropping or giving an impact on the product during operation can cause errors or fire.
• Do not keep the product under the environment conditions of too hot, too cold or too humid. Distortion or errors can occur if the product is exposed to sunlight for long periods of time in summer or left in a too cold area. Do not place the product close to fire or expose to water. Fire or serious errors can be caused.
• In case of disassembly of the product, the user shall disassemble it after complete power-off. Disassembly with power-on status can cause errors of the product.
• Keep or carry SD cards in a safe keep box because static electricity or other environmental elements can damage the data of the product.
• SD cards are expendable supplies. After a certain usage period, normal recording can not be implemented because partial memory sectors can be already damaged. This product supports an in system automatic SD memory checking. Purchase a new card for stable recording. In case that the replacement of the SD card is needed the automatic product system check will recommend it systematically.
• Stored data can be destroyed (lost) in case that the memory card is ejected or power is off while image data is being read to play or even while recording, copying or deleting process is being implemented.
• The company shall not be responsible for data destroy (loss) of stored data.
• Copy and store important data to other storage (e.g. hard disk, CD, portable flash memory)