vehicle black boxes | Visiondrive(Geo Cross)

Home > Product > VisionDrive_VD-9600WHG/B

Features

Spec.

Install

Usage

Caution

Scope of Warranty and Liability

This product is a secondary device for safe driving as such the manufacturer and their approved agents cannot be held liable or responsible for any loss of data experienced through the operation of the unit.
This product is designed to record / save / play and analyze videos related to impacts / accidents or videos recorded at your own discretion while driving. Product features can be different according to driving conditions, the status of the car as well as firmware version on the unit. (Firmware updates are supplied by the manufacturer as required to improve product quality and stability) Note that the operating environment and SD memory card status may affect video recording so please take this into consideration.
This product records and saves videos related accidents which are triggered by an internal Shock Sensor. In instances where the shock is not sufficient to activate the event mode you are recommended to press SHOT button to store the data into the separate event folder.

Operational Precautions

Please keep these instructions in mind for safe and proper use of the product by preventing unexpected accident or risks in advance. We will not be responsible for the problems arising from failure to follow the instructions contained within this manual.
You are required to deal with the product safely. If you need to do something with it we ask that you stop and park the vehicle in a safe place before engaging with the recorder via the touch screen. Never interact the device whilst the vehicle is in motion.
Do not disassemble or modify this product. This prohibited action may cause accidents such as an electric shock and the product is not guaranteed for further after service or support. Any products requiring inspection or repair should be returned to the agent/dealer in the first instance.
DC12V ~ DC24V is the allowed voltage range for proper operation of the device without malfunction or fire.
Cables other than the supplied units or by connecting the cable to a different power source, may result in recorder malfunction or fire. In addition, please carefully manage wires and cable routing to prevent damage to the cable.
If the vehicle is not used for a long time, disconnect the power cable from the recorder as continued long term use could discharge the vehicles primary battery.
When mounting the product in the vehicle, follow the procedure to attach it securely to the inside of the vehicle glass. Impurities on the vehicle windshield mounting surface may weaken the adhesive strength. If the product falls from its mount it may be damaged.
This product and its accessories are not waterproof. Under no circumstances should you expose the product to liquids or impurities.
Do not use chemicals or detergents to clean the device. This can result in malfunctioning of the product.
Accumulation of impurities on the camera lens or the window surface near the camera may result in diffused or abnormal refraction phenomena. You may not get a clean image from this so please ensure that the area surrounding the product, camera lens is kept clean.
Excessive tinting on the window may also distort or reduce the clarity of recorded data.
Recording can be distorted under the condition where brightness suddenly changes like passing through a tunnel, direct sunlight reflection during daytime or where only low light is available at night time.
If not enough light is available, the use of additional external lighting may improve the performance of the recorder.
In case of slight impact, the product may not be able to classify it as an event file automatically (it is however recorded as a Normal file). In such cases, please use the SHOT button to force the creation an event file manually.
Dropping or strong shocks applied to this product will cause malfunctions.
Please try to keep the product away from water, fire, hot, cold or humid environments. If long-term exposure to the summer sun light or too low temperatures, deformation or malfunction may occur.